You will need:
1.2.3.4. Basic tools - measuring tape, framing hammer, saw (power or handsaw. You only have to make two simple cuts), pencil, beer.
Step 1:Step 2:Step 3: Prop one of the two foot boards you cut under one end of one of the 8 foot boards and finish pounding the nails so that they go all the way into the boards. Unless you have an assistant this is going to require you to do some fancy balancing - having the nails already partly hammered in makes this much easier! Once you have one end done, get that second two foot board and bang it on to the other side.
Step 4:Step 5:Step 6:Step 7 (optional):Step 8: Cool off with a beer. I recommend Sierra Nevada Pale Ale. Sam Adams Noble Pils is nice too, but the Sierra Nevada uses American grown cascade hops and is really outstanding!
Tips:
1.2.3.4. Basic tools - measuring tape, framing hammer, saw (power or handsaw. You only have to make two simple cuts), pencil, beer.
Step 1:Step 2:Step 3: Prop one of the two foot boards you cut under one end of one of the 8 foot boards and finish pounding the nails so that they go all the way into the boards. Unless you have an assistant this is going to require you to do some fancy balancing - having the nails already partly hammered in makes this much easier! Once you have one end done, get that second two foot board and bang it on to the other side.
Step 4:Step 5:Step 6:Step 7 (optional):Step 8: Cool off with a beer. I recommend Sierra Nevada Pale Ale. Sam Adams Noble Pils is nice too, but the Sierra Nevada uses American grown cascade hops and is really outstanding!
Tips:
Comment